Subnetting

byMandik -
0

 In case of class A and B IP addresses, each of them provides for a large number of hosts. For class A, the total numbers of hosts available are 224-2 or 16,777,216 hosts (class A has 24 bits available for host component and each bit can have two values – 0 and 1. Out of the total value one address is for network address and the other for broadcast. So two addresses are deducted). Similarly a Class B addresses provides for 216-2 or 65,534 hosts. In the first chapter you learned about disadvantages of large networks and why it becomes necessary to divide them into smaller networks joined by routers. So creating a network with total number of hosts allowed for class A or B addresses will cause a lot of problems. Meanwhile creating small networks with class A or B addresses will waste a lot of addresses.

To overcome this problem with class based addressing, subnetting was introduced. Subnetting allows you to borrow some host bits and use them to create more networks. These networks are commonly called subnets and are smaller in size. But since each network has a network address and a broadcast address, some addresses get wasted.

To further understand how subnetting is useful consider a Class C address. Each class C address has 28-2 or 254 host addresses available. If you wanted 2 networks with 100 addresses and used 2 class C networks, you would waste 308 addresses. Instead of using two class C networks, you can subnet one to provide you two networks of 126 addresses each. This way lesser number of addresses would be wasted.

While some of the benefits of subnetting are discussed above, the following list discusses all the benefits associated with it:

  • Reduced broadcasts – While broadcasts are necessary, too many of them can bring down a network and the number of broadcasts is proportionate to the size of the network. So subnetting a network to smaller subnetworks, helps reduce broadcasts since routers do not forward broadcasts.
  • Increased Network Performance – The direct result of reduced broadcasts is a network that has more bandwidth available to the hosts. More bandwidth and lesser hosts result in a better performance of the network.
  • Easier Management – Managing and troubleshooting a large network is cumbersome and difficult. Subnetting breaks a network into smaller subnetworks, making it easier to manage each of them.
  • Scalability – A single large network spanning a large geographical location will be more difficult and costlier to manage. WAN links connecting different locations are costly and having broadcasts choking the network can result is wasted money. Hence breaking down a large network makes is easier to scale a network across geographical locations.

Now that you understand the concept and benefit of subnetting, consider the problem that arises with it. In case of class based subnetting, the first octet of the dotted decimal address tells which part of the address is the network component and which one is the host component. But when host bits are borrowed for subnetting, the class based boundaries do not apply and it is not possible to say which bits are network bits. To overcome this, a third component of IP addresses were added. These are called the subnet masks.

Subnets masks, like IP addresses, are 32 bit long. The value of subnet mask represents which bits of the IP address are network components and which are host component. A value of 1 in a subnet mask shows that the corresponding bit in the IP address is a network component while a value of 0 shows that the corresponding bit is a host component. The following examples will help clarify this further:

  1. An IP address of 192.168.10.1 with a subnet mask of 255.255.255.0 (11111111.11111111.11111111.00000000) shows that the first three octets of the IP address are the network component while the last octet is the host component.
  2. An IP address of 172.16.100.1 with a subnet mask of 255.255.128.0 (11111111.1111111.100000000.00000000) shows that one bit from the third octet has been borrowed from the host component. Hence the network component is now 17 bits long instead of the default 16 bit in a class B address.
  3. An IP address of 10.1.1.1.1 with a subnet mask of 255.255.0.0 (11111111.11111111.00000000.0000000) shows that the entire second octet has been borrowed from the host component and now the network component is 16 bits long instead of the default 8 bit of a class A address.

One restriction that applies to subnet masks is that all network bits (1) and all host bits (0) should be contiguous. So a subnet mask of 11001100.11110000.11110000.00001111 is not valid because the network and host bits are not contiguous. Table 2-5 shows the valid subnet mask values is an octet.




Table 2-5 Valid subnet mask values in an octet

Binary ValueDecimal Value
000000000
10000000128
11000000192
11100000224
11110000240
11111000248
11111100252
11111110254
11111111255

 

Subnets masks are commonly represented in two ways:

  1. Dotted Decimal – 10.1.1.1 255.255.0.0
  2. Classless Inter-Domain Routing (CIDR) notation – 10.1.1.1/16

Exam Alert: It is very important to be able to understand subnet masks with both the dotted decimal as well as the CIDR format. Also remember that any mask not given in Table 2-5 is not valid for an octet.

By now you may have figured out that the default subnet mask of class A is 255.0.0.0 or /8, the default mask of class B is 255.255.0.0 or /16 and the default mask of class C is 255.255.255.0 or /24. Table 2-6 shows the default masks of each class. These default masks cannot be changed. For example, you cannot use a mask of 255.255.0.0 for a class C address. If you try to use an invalid mask such as this, every device will produce an error. For each class, the minimum mask is the default mask and it cannot be reduced. Class A has to have a minimum mask of 255.0.0.0, class B has to have a minimum mask of 255.255.0.0 and class C has to have a minimum mask of 255.255.255.0.

Table 2-6 Default Subnet masks

ClassFormatDefault Subnet Mask
Anetwork.host.host.host255.0.0.0
Bnetwork.network.host.host255.255.0.0
Cnetwork.network.network.host255.255.255.0

 

Remember that an IP address without mask or a mask without IP address does not mean anything. A mask of /24 does not mean that the address is a class C address. Even a class A or class B address can have a mask of /24 after subnetting. Table 2-7 provides a list of dotted decimal subnet mask value and the corresponding CIDR value.

Table 2-7 Subnet Mask values

Dotted Decimal ValueCIDR notation
255.0.0.0/8
255.128.0.0/9
255.192.0.0/10
255.224.0.0/11
255.240.0.0/12
255.248.0.0/13
255.252.0.0/14
255.254.0.0/15
255.255.0.0/16
255.255.128.0/17
255.255.192.0/18
255.255.224.0/19
255.255.240.0/20
255.255.248.0/21
255.255.252.0/22
255.255.254.0/23
255.255.255.0/24
255.255.255.128/25
255.255.255.192/26
255.255.255.224/27
255.255.255.240/28
255.255.255.248/29
255.255.255.252/30

 

Before moving to actual subnetting, you need to remember the powers of 2 i.e. the value of 2 multiplied as many times as the given exponent. For example 24 = 2 x 2 x 2 x 2 = 16. Table 2-8 lists the first 14 values. It is not necessary to remember them all, but do remember that each value is twice the previous one. The more you remember these values, the easier it will be to subnet on your CCNA exam

Table 2-8 Powers of Two

ExponentValue
212
224
238
2416
2532
2664
27128
28256
29512
2101024
2112048
2124096
2138192
21416384

 

Now that you know what subnetting is and how subnet masks are used, it is time to create subnets. When planning to subnet, you need to know three things:

  1. Total number of subnets that you need
  2. Total number of hosts per subnet that you need
  3. Available network and subnet mask (which will be subnetted)

Armed with answers to this, you need to find the following:

  1. Subnet Mask to be used across the network
  2. Valid subnets
  3. Network address for each subnet
  4. Broadcast address for each subnet
  5. Valid host addresses in each subnet.

For this section I will take a sample requirement of 8 networks with 30 hosts each with one class C network of 192.168.10.0 255.255.255.0 available. Now that you have the requirement, first thing you need to find is the new subnet mask that can satisfy the requirement. To find the subnet mask, follow the steps given below:

  1. Find the exponent of 2 whose value is more than or equal to the number of subnets required. Lets call this 2sn. For our example, we need 8 subnets and 23 equals to 8. So our 2sn is 23.
  2. Find the exponent of 2 whose value minus 2 is more than or equal to the maximum number of hosts required in a subnet. Lets call this (2h-2) For our example, we need a maximum of 30 hosts in a subnet and 25-2 gives us 30 hosts per subnet.
  3. Make sure sn + h from the above two steps does not exceed the number of host bits available in the network available. If the sum of sn and h exceed the available host bits then you will require another network of the same class or a network of a higher class. In our example we have 8 bits of host addresses available in 192.168.10.0 255.255.255.0 network. Our sn+h is 3+5 that gives us 8.
  4. Convert the available mask to the CIDR notation and add sn to it to get the new subnet mask. For our example the mask 255.255.255.0 can be converted to /24. On adding 3 we get a mask of /27. Converting from /27 to the dotted decimal format is easy. /24 is 255.255.255.0 or 11111111.1111111.1111111.00000000. /27 will be 11111111.1111111.1111111.11100000. You need not worry about the first 3 octets since they are already known to be 255.255.255. For the last octet add the decimal value for each network bit. In our case it will be 128+64+32 = 224. So the new subnet mask is 255.255.255.224. Table 2-7 also provides a list of dotted decimal and networking bits value.

The most difficult part is now over. To find the rest of the 4 answers, follow the steps given below:

  1. Valid subnets – To find the valid subnets deduct the interesting octet value from 256. Interesting octets are those octets that have host bits. Available subnets will be in multiples of the resultant value up to 256. In our case the fourth is the interesting octet. Deducting 224 from 256 gives us 32. So the available subnets are 0,32, 64, 96, 128, 160, 192, 224.
  2. Network Address of each subnet – The network address is the very first address of each subnet. So for our valid subnets, the network address would be 192.168.10.0, 192.168.10.32, 192.168.10.64, 192.168.10.96, 192.168.10.128, 192.168.10.160, 192.168.10.192 and 192.168.10.224
    Exam Alert: Sometime back Cisco used to discard the first and the last subnet, also called subnet zero. So the number of subnets used to be 2n-2. Starting IOS version 12.0 the ip subnet-zero command is enabled by default and in Cisco exams the first and last subnets are considered unless specified otherwise. Be on the lookout for questions on your CCNA exam that ask you not to consider subnet zero. In such cases, leave out the first and the last subnet. To fully understand how the command affects the calculation, consider a Class C network with a mask of /26. It will give you subnets 0, 64, 128 and 192 if subnet-zero is allowed, else it will only give you subnets 64 and 128.
  3. Broadcast Address of each subnet – The last address of a subnet is the broadcast address. Simply deduct 1 from the next network address to find the broadcast address of a subnet. For our example subnets the valid broadcast addresses are:
Network AddressBroadcast Address
192.168.10.0192.168.10.31
192.168.10.32192.168.10.63
192.168.10.64192.168.10.95
192.168.10.96192.168.10.127
192.168.10.128192.168.10.159
192.168.10.160192.168.10.191
192.168.10.192192.168.10.223
192.168.10.224192.168.10.255

 

4. Valid hosts addresses in each subnet – For every subnet, the valid host addresses lie between the network address and the broadcast address. For our example, the valid host addresses for each subnet are:

Network AddressValid Host addressesBroadcast Address
192.168.10.0192.168.10.1 – 30192.168.10.31
192.168.10.32192.168.10.33 – 62192.168.10.63
192.168.10.64192.168.10.65 – 94192.168.10.95
192.168.10.96192.168.10.97 – 126192.168.10.127
192.168.10.128192.168.10.129 – 158192.168.10.159
192.168.10.160192.168.10.161 – 190192.168.10.191
192.168.10.192192.168.10.193 – 222192.168.10.223
192.168.10.224192.168.10.225 – 254192.168.10.255

Exam Alert:  Subnetting is one of the most important topics in the CCNA exam. Subnetting related questions will not be straight forward like what you learned just now. Mostly you would be given an IP address with a subnet mask and you will need to find out if it is a host, subnet or broadcast address. In following examples review how to approach such questions.

 

 

In the following sections, you will encounter variations of subnetting questions. For all of them the process is similar to what you just learned. The steps you need to follow are summarized below:

  1. Find the interesting octet in the given subnet mask. Remember that the octet with a value of less than 255 will be the interesting octet.
  2. Deduct the value of interesting octet from 256 to find the increment by which the network numbers are increasing. These are also your subnet addresses.
  3. Write down the subnet address and broadcast address for each subnet
  4. Write down the host addresses of each subnet
  5. Once you have all the above information, you will find the answer to the given question.

Subnetting Class C Addresses

Subnetting technique remains the same irrespective of the class of address. The difference that the class makes is the number of bits available for subnetting. Class C starts with a mask of /24 and can have a maximum mask of /30. We cannot use /31 or /32 because atleast 2 hosts bits are required for the network and broadcast addresses and /31 and /32 give us 1 and zero host bits respectively. In the examples below, you get to practice subnetting class C addresses.

Subnetting Class C Address – Example #1

Problem: Is 192.168.1.193/26 a host address?

Solution:

  1. Converting /26 to dotted decimal format gives 255.255.255.192. The fourth octet is the interesting octet.
  2. Deducting 192 from 256 gives us 64. So the subnet addresses are 0,64,128 and 192
  3. The network address and broadcast address are:
Network AddressBroadcast Address
192.168.1.0192.168.1.63
192.168.1.64192.168.1.127
192.168.1.128192.168.1.191
192.168.1.192192.168.1.255

 

4. The host addresses for each of the subnets are:

Network AddressHost AddressesBroadcast Address
192.168.1.0192.168.1.1-62192.168.1.63
192.168.1.64192.168.1.65-126192.168.1.127
192.168.1.128192.168.1.129-190192.168.1.191
192.168.1.192192.168.1.193-254192.168.1.255

 

5. The given address, 192.168.1.193 is a host address in the last subnet.

Subnetting Class C Address – Example #2

Problem: What is the network and broadcast address for the subnet to which the address 192.168.1.228/28 belongs?

Solution:

  1. Converting /28 to dotted decimal format gives 255.255.255.240. This shows that the fourth octet is the interesting octet.
  2. Deduction 240 from 256 gives us 16. So the subnet addresses are 0, 16, 32, 48, 64 … 208, 224, 240.
  3. The network and broadcast address for the subnets are:

 

Network AddressBroadcast Address
192.168.1.0192.168.1.15
192.168.1.16192.168.1.31
192.168.1.32192.168.1.47
192.168.1.48192.168.1.63
192.168.1.64192.168.1.79
192.168.1.208192.168.1.223
192.168.1.224192.168.1.239
192.168.1.240192.168.1.255

 

 

 

 

 

 

 

 

4. The host addresses of each subnet are:

Network AddressHost AddressesBroadcast Address
192.168.1.0192.168.1.1-192.168.1.14192.168.1.15
192.168.1.16192.168.1.17-192.168.1.30192.168.1.31
192.168.1.32192.168.1.33-192.168.1.46192.168.1.47
192.168.1.48192.168.1.49-192.168.1.62192.168.1.63
192.168.1.64192.168.1.65-192.168.1.78192.168.1.79
192.168.1.208192.168.1.209-192.168.1.222192.168.1.223
192.168.1.224192.168.1.225-192.168.1.238192.168.1.239
192.168.1.240192.168.1.241-192.168.1.254192.168.1.255

 

5. From the above table, you can see that the address 192.168.1.228 lies in the 192.168.1.224 subnet. The network address for this subnet is 192.168.1.224 and the broadcast address is 192.168.1.239.

Subnetting Class C Address – Example #3

Problem: What type of address is 192.168.5.47/29? What is the network and broadcast address of the subnet that this address belongs to and how many host addresses are available in the subnet?

Solution:

  1. Converting /29 gives 255.255.255.248. This shows that the fourth octet is the interesting octet.
  2. Deducting 248 from 256 gives us 8 so the subnets are 0, 8, 16, 24, 32, 40, 48…240,248
  3. 192.168.5.47 lies in the 192.168.5.40 subnet and is the last address before the next subnet 192.168.5.48. This means that 192.168.5.47/29 is a broadcast address for the 192.168.5.40/29 subnet.
  4. The network address for this subnet is 192.168.5.40 and the valid host address range is 192.168.5.41-192.168.5.46

Subnetting Class B addresses

The process to subnet class B addresses is same as that used to subnet class C address. The difference is that you have more bits available for subnetting. Class B addresses start with a mask of /16 and can have a maximum mask of /30. One big difference when subnetting class B addresses is that you deal with large number of hosts per subnet and it becomes important to remember the Powers of Two table shown in Table 2-8. In the examples given below, you will practice subnetting class B addresses.

Subnetting Class B address – Example #1

Problem: Is 172.16.98.45/19 a host address?

Solution:

  1. Converting /19 to dotted decimal format gives us 255.255.224.0. The third octet is the interesting octet.
  2. Deducting 224 from 256 gives 32. So the subnet addresses are 0, 32, 64, 96, 128, 160, 192, 224
  3. The network address and broadcast address are:
Network AddressBroadcast Address
172.16.0.0172.16.31.255
172.16.32.0172.16.63.255
172.16.64.0172.16.95.255
172.16.96.0172.16.127.255
172.16.128.0172.16.191.255
172.16.192.0172.16.223.255
172.16.224.0172.16.255.255

 

 

 

 

 

 

 

4.  The host address range for each subnet is:

Network AddressHost AddressesBroadcast Address
172.16.0.0172.16.0.1-172.16.31.254172.16.31.255
172.16.32.0172.16.32.1-172.16.63.254172.16.63.255
172.16.64.0172.16.64.1-172.16.96.254172.16.95.255
172.16.96.0172.16.96.1-172.16.127.254172.16.127.255
172.16.128.0172.16.128.1-172.16.191.254172.16.191.255
172.16.192.0172.16.192.1-172.16.223.254172.16.223.255
172.16.224.0172.16.224.1-172.16.255.254172.16.255.255

 5. The address 172.16.98.45 is a host address in the 4th subnet.

Subnetting Class B address – Example #2

Problem: What are the network and broadcast addresses for the subnet to which the address 172.19.251.100/23 belongs.

Solution:

  1. Converting /23 to dotted decimal format gives us 255.255.254.0. This shows that the third octet is the interesting octet.
  2. Deducting 254 from 256 gives us 2. So the subnet addresses are 0, 2, 4, 6, 8, 10…248, 250, 252, 254
  3. The network, broadcast and valid host ranges for these subnets are:
Network AddressHost AddressesBroadcast Address
172.19.0.0172.19.0.1-172.19.1.254172.19.1.255
172.19.2.0172.19.2.1-172.19.3.254172.19.3.255
172.19.4.0172.19.4.1-172.19.5.254172.19.4.255
172.19.6.0172.19.6.1-172.19.7.254172.19.7.255
172.19.8.0172.19.8.1-172.19.9.254172.19.9.255
172.19.250.0172.19.250.1-172.19.251.254172.19.251.255
172.19.252.0172.19.252.1-172.19.253.254172.19.253.255
172.19.254.0172.19.254.1-172.19.255.254172.19.255.255

 

5. As you can see, the address 172.19.251.100/23 is a valid host address in the 172.19.250.0/23 subnet. The network address for this subnet is 172.19.250.0 and the broadcast address is 172.19.251.255.

Subnetting Class B address – Example #3

Problem: You see that your PC has an IP address and subnet mask of 172.30.40.5/21. How many subnets can your network have? How many valid host addresses can each subnet have?

Solution:

  1. Converting a /21 mask to dotted decimal format gives us 255.255.248.0.
  2. Converting it to dotted binary format gives us 11111111.11111111.11111000.00000000. This shows that 5 bits have been borrowed for subnets and 11 bits are available for host addresses.
  3. The borrowed 5 bits gives us 25=32 subnets.
  4. The 11 host bits give us 211 = 2048 addresses. Out of 2048, 2 addresses are reserved for host and broadcast addresses. So this leaves us with 2046 valid host addresses per subnet.

Subnetting Class A addresses

The process to subnet class A addresses is the same as that you have used to subnet class C and B addresses. The big difference is the large numbers you can deal with while using masks such as /9. Class A addresses start with a mask of /8 and can have a maximum of /30 mask. In the examples below, you will practice subnetting class A addresses.

Subnetting Class A address – Example #1

Problem: Is 10.127.255.254/9 a host address?

Solution:

  1. Converting /9 to dotted decimal format gives 255.128.0.0. The second octet is the interesting octet.
  2. Deducting 128 from 256 gives 128. So the subnet addresses are 0 and 128.
  3. The network and broadcast address are:
Network AddressBroadcast Address
10.0.0.010.127.255.255
10.128.0.010.255.255.255

 

 

 

4. The host address range for the subnets are:

Network AddressHost AddressesBroadcast Address
10.0.0.010.0.0.1-10.127.255.25410.127.255.255
10.128.0.010.128.0.1-10.255.255.25410.255.255.255

 

5. 10.127.255.254 is the last host address in the 1st subnet.


Exam Alert:  A /30 or 255.255.255.252 is the highest mask which can be practically used in a network. It gives 2 host addresses and is ideal for point-to-point links in a network. Point-to-Point links are usually found in routers terminating WAN links.[/stextbox

Subnetting Class A address – Example #2

Problem: This is a different kind of a problem. Your network number is 21.0.0.0.  You need to have as many subnets as possible without exceeding 1000 subnets while at the same time having at least 500 hosts per subnet.  What subnet mask would you use?

Solution:

Since 21.0.0.0 is a Class A network, the default mask is /8. So you have 24 bits of host addresses that can be borrowed for the subnetting. Looking back at Table 2-8, you will see that 210 gives us 1024 while 29 gives us 512. Since 1024 exceeds the given 1000 subnets, you will need to use 29. This means 9 bits will be borrowed for the network part leaving the rest for the host part. The table below shows the default mask and the new mask after borrowing 9 bits:

Octets1st Octet2nd Octet3rd Octet4th Octet
Default mask11111111000000000000000000000000
New mask11111111111111111000000000000000

 

The new mask of /17 will leave 15 bits for the host part which gives us much more than the required 500 hosts per subnet.

Subnetting Class A address – Example #3

Problem: You have been given a network number of 10.0.0.0/8. You need to subnet it such that you have at least 8000 hosts per subnet and at least 2000 subnets. What subnet mask will you use?

Solution:

10.0.0.0/8 is a class A address with a default mask of /8. This leaves you with 24 bits for host addresses. So you need to find which multiples of 2 give us the required numbers. Looking back at Table 2-8, you will see that 211 gives us 2048 while 213 gives us 8192. This means you can borrow 11 bits for the network part, leaving 13 bits for the host part. The table below shows the default mash and the new mask in binary format:

Octets1st Octet2nd Octet3rd Octet4th Octet
Default mask11111111000000000000000000000000
New mask11111111111111111110000000000000

 

10.0.0.0/19 will give you 2048 subnets with 8192 host bits remaining. Each subnet will have a maximum of 8109 hosts, leaving 2 addresses for network and broadcast addresses.

Subnetting Class A address – Example #4

Problem: What are the network and broadcast addresses for the subnet to which the address 10.212.10.50/12 belongs.

Solution:

  1. Converting /12 to dotted decimal format gives us 255.240.0.0. This shows that the second octet is the interesting octet.
  2. Deducting 240 from 256 gives us 16. This means that the valid subnets are 0, 16, 32, 48, 64…208, 224, 240
  3. The network, valid host and broadcast addresses for these subnets are:
Network AddressHost AddressesBroadcast Address
10.0.0.010.0.0.1-10.15.255.25410.15.255.255
10.16.0.010.16.0.1-10.31.255.25410.31.255.255
10.32.0.010.32.0.1-10.47.255.25410.47.255.255
10.48.0.010.48.0.1-10.63.255.25410.63.255.255
10.64.0.010.64.0.1-10.207.255.25410.207.255.255
10.208.0.010.208.0.1-10.223.255.25410.223.255.255
10.224.0.010.224.0.1-10.239.255.25410.239.255.255
10.240.0.010.240.0.1-10.255.255.25410.255.255.255

 

 

 

 

 

 

 

 

 

 

 

  1. The address 10.212.10.50/12 is a host address in the 10.208.0.0/12 subnet.
  2. The network address for the subnet is 10.208.0.0 and the broadcast address is 10.223.255.255
Tags:
Post a Comment (0)
Previous Post Next Post

Advertisment